+971 50 467 9121, +971 42562488 info@hygieneplusuae.com

Blog

HAND SANITIZER TO PROTECT AGAINST VIRUS

You know you need to keep your hands clean. As much as your hands serve you, they also put germs in contact with your mouth, eyes, nose, and many other parts of your body. We hope you’re already washing your hands with soap and warm water multiple times a day, as that is the best way to clean them, but another worthy alternative is hand sanitizer.

  According to studies, 1 in 5 people don’t regularly wash their hands. Of those who do, 70% don’t use soap. Providing hand sanitizer in key areas (including bathrooms and kitchens) makes it more likely that people will use it to kill harmful bacteria. Alcohol-based sanitizers can reduce about 99% of the bacteria on your hands.

Benefits

  • Hand sanitizers are convenient, portable, easy to use and not time consuming.
  • Several studies have concluded that the risk of spreading gastrointestinal (stomach) and respiratory infection is decreased among families who use hand sanitizer.
  • Commercially prepared hand sanitizers contain ingredients that help prevent skin dryness. Using these products can result in less skin dryness and irritation than hand-washing.
  • Studies show that adding hand sanitizers to classrooms can reduce student absenteeism due to illness by 20 per cent. What’s more, many kids think instant hand sanitizers are fun to use.

30 seconds of using hand sanitizer kills a much bacteria as two full minutes of handwashing. When used correctly, sanitizer can be insanely good at preventing a cold or the flu. The more alcohol it contains and the more often you use it, the less harmful bacteria will be on your hands. Most commercial sanitizers are 99.9 percent effective at killing germs.

 Soap is not nearly as effective (especially when used improperly), and it can only be used when water is available. More abrasive varieties of soap can also damage the skin unless used in combination with a moisturizer. Although once perceived as a skin irritant because of its alcohol content, many sanitizers are now available with moisturizers built in to prevent dryness.

There are many benefits of hand sanitizer, from fighting germs efficiently to fighting them conveniently (and even improving your skin). Without a doubt, using this germ-fighting product regularly throughout the day will boost your cleanliness and your health no matter where life takes you.

HAND SANITIZER TO PREVENT VIRUS

 

Hand sanitizers have been shown as an effective tool to combat infections due to harmful germs. Alcohol-based hand sanitizers help to deter the spread of germs and illness-causing bacteria, particularly in busy environments like schools and offices: Stop the Spread of Germs. Hand sanitizers can help in fighting germs but health authorities maintain traditional washing is still the best method amid the corona virus outbreak.

BENEFITS OF HAND SANITIZER

  • Stop the Spread of Germs: According to studies, 1 in 5 people don’t regularly wash their hands. Of those who do, 70% don’t use soap. Providing hand sanitizer in key areas (including bathrooms and kitchens) makes it more likely that people will use it to kill harmful bacteria.
  • Promote Good Hygiene and Health: A healthy building is a productive one. One study in the American Journal of Infection Control (AJIC) found that encouraging the use of hand sanitizers in schools reduced absenteeism by almost 20%!
  • Reduce Waste: As an extra precaution, many people will use paper towels to open doors when leaving bathrooms or kitchens. Placing hand sanitizers near exits makes it easy for people to defend themselves from germs without needing to create additional mess.

It’s important you use hand sanitizer properly to ensure it does the job it’s meant to do – get rid of germs before they are able to spread, Hand sanitizers are not meant to clean your hands. They’re meant to disinfect Residue like oil or dirt will prevent hand sanitizers from penetrating down to your skin so Don’t Use Hand Sanitizer if Your Hands are Dirty.

Hand sanitizers are effective, It is observed that hand sanitizers clean your hands more effectively than soap and water, and it also reduces the bacterial burden. Researches have shown that when you clean your hands with a hand sanitizer, they tend to stay clean longer than if you were to clean them using soap and water. The hand sanitizer also prevents the transmission of bacteria from person to another. Sanitizer that contains between 60-95% alcohol. Also, when you use hand sanitizer, make sure you do so the right way. 

Especially during flu season, minimizing your exposure to other people’s germs is crucial for your health. When you take a moment to sanitize your hands a few times throughout the day, you reduce your chances of getting sick. Although once perceived as a skin irritant because of its alcohol content, many sanitizers are now available with moisturizers built in to prevent dryness.

If you don’t have access to soap and water, hand sanitizer is a good temporary stand-in. While it won’t make grubby hands feel fresh, a hand sanitizer with a high level of alcohol can effectively kill bacteria and viruses. Alcohol-free sanitizers may not work as well and the chemicals they use could irritate your skin even more than their alcohol-containing counterparts.  

PARTS AND MATERIALS TO BE CLEANED

PARTS AND MATERIALS TO BE CLEANED

First, consider the parts to be cleaned. They may consist of non- or hardly-processed sections, sheets and wires. But also machined parts or assembled components needing cleaning. Therefore, they may be composed of different metals or different combinations of metals. Plastics and composite materials can frequently be found and indeed are on the increase because e.g. the automobile industry as well as others uses more and more lighter materials.

Mass and size can be very important for the selection of cleaning methods, for example big shafts for ships are usually cleaned manually, whereas tiny shafts for electrical appliances are often cleaned in bulk in highly automated plants.

Similarly important is the geometry of the parts. Long, thin, branching, threaded holes, which could contain jammed chips, feature among the greatest challenges in this technical field. high pressure and the power wash process are one way to remove these chips as well as robots, which are programmed to exactly flush the drilled holes under high pressure.

PLACE OF CLEANING

Another consideration is the place of cleaning. E.g. is the cleaning to be done on site, which can be the case with repair and maintenance work.

Usually the cleaning takes place in a workshop. Several common methods are solvent degreasing, vapor degreasing and using an aqueous parts washer. Companies often want the charging, loading and unloading to be integrated into the production line, which is much more demanding as regards size and throughput ability of the cleaning system.

Such cleaning systems often exactly match the requirements regarding parts, contaminants and charging methods (special production). Nonetheless central cleaning equipment, often built as multi task systems, are commonly used. These systems can suit different cleaning requirements. Typical examples are the wash stands or the small cleaning machines which are found in many insdustrial plants.

PROFESSIONAL DUCT CLEANING SERVICE

PROFESSIONAL DUCT CLEANING SERVICE

The Indoor Air Quality market has been in a boom in the last few years, as more people are aware of the germs and allergens that persist in their homes. What most contractors do not know is the massive potential to tap into an open market and opportunity to generate more revenue or start a new division of their existing carpet cleaning enterprise.

FEATURES

  • Onsite Training in 30k sq ft facility
  • Extensive Technical Support
  • Industry Leading Equipment
  • Financing Programs Provided
  • 30 yrs of Commercial Duct Cleaning Experience
  • Lightweight One Person Air Duct Cleaning Equipment

BENEFITS

  • Gain Unlimited Earnings
  • Realize a 50%-70% Net Profit
  • Operate With a Low Overhead
  • Offer Existing and Potential Customers Clean Indoor Air
  • Certified Training Provided
  • Zero Interest Financing Available

DUCT CLEANING SERVICES

Professional duct cleaning services use specialized blowers, vacuums, and brushes to clean out the supply, intake, and return ducts throughout your home. Duct cleaning should also involve a thorough cleaning of the air handler, registers, grilles, fans, motors, housings, and coils of the HVAC system.

There’s no research at present proving that routine duct cleaning improves the air quality or reduces dust in your home. There is, however, evidence that dirty heating and cooling coils, motors, and air handling units can make your HVAC unit less efficient.

While duct cleaning alone doesn’t seem that necessary, there are cases where cleaning the HVAC unit and ductwork could be useful.

HOW TO REMOVE WATER STAINS ON WOOD

HOW TO REMOVE WATER STAINS ON WOOD

Removing water stains from wood can be a little tricky, but it is by no means impossible. Water stains on wood will have a different appearance depending on how deep they are, and the finish of the wood they have damaged. White marks mean the water has only affected the surface or finish of the wood – these are easier to remove than dark water stains.

For surface water stains, the following method is appropriate:

  1. Apply olive oil or an oil-based furniture polish directly on to the stain, and leave it to soak in overnight.
  2. If the mark remains, try vigorously rubbing white toothpaste into the stain.
  3. Wipe the surface clean and re-treat if necessary.
  4. To finish, apply an oil or wax-based furniture polish.

To deal with darker stains, you will need to strip back the surface of the wood with sandpaper and allow it to completely dry out, before tackling the colour of the stain:

  • To make the stain lighter, very carefully apply a weak bleach solution, following the safety instructions on the label.
  • To make the stain darker, apply an appropriate wood stain, once again according to the manufacturer’s instructions.

Then, match the finish to the rest of the wood using varnish or furniture wax.

METHODS OF FLOOR CLEANING AND WOOD FLOOR

METHODS OF FLOOR CLEANING

The treatment needed for different types of floors is very different.

Slipping is a common safety hazard for cleaning methods that involve water or other liquids, especially if the floor is left wet.

Sawdust is used on some floors to absorb any liquids that fall rather than trying to prevent them being spilt. The sawdust is swept up and replaced each day. This was common in the past in pubs and is still used in some butchers and fishmongers.

It used to be common to use tea leaves to collect dirt from carpets and remove odours.

There are also a wide variety of floor cleaning machines available today such as floor buffers, automatic floor scrubbers and sweepers, and carpet extractors that can deep clean almost any type of hard floor or carpeted flooring surface in much less time than it would take using a traditional cleaning method.

WOOD FLOORING

Different types of wood flooring may require completely different care depending on whether they are waxed, oiled or have a polyurethane coating. It is important to determine the type of finish of a wood floor and always treat it in the proper manner, for instance it is difficult to clear wood floor wax from a floor coated with polyurethane. Simple cleaning instructions:

  1. Clear the floor of any furniture that is easy to move.
  2. Sweep or vacuum all loose dirt and debris.
  3. Mop the floor, going along with the grain. For a polyurethane coated floor, dampen a mop with water and a few drops of dishwashing liquid. Be sure to ring out the mop thoroughly before using it on the floor. Run the mop back and forth, going with the grain of the wood in smooth strokes. Do not use water for lacquered or shellacked floors, as it can stain the wood and cause buckling.
  4. Buff the floor with a soft cloth to remove any soapy residue. Cloth diapers work well for buffing since they are very soft and absorbent.

TILE AND STONE

Tile and stone flooring is common in kitchens, stairs, and bathrooms. Its cleaning process can be divided into three steps:

  1. Dirt or dust should first be removed with a vacuum cleaner or a broom.
  2. Have a floor cleaning solution or spray bottle for the appropriate floor. If you are cleaning stone floors (marble, granite, travertine, etc.), make sure the cleaning agent states that it is for stones. An acidic tile cleaning solution can be used on ceramic and porcelain floors
  3. After spraying the tile or stone floors in a small area, use a mop to clean and scrub floors.then wipe it with dry cloth.

PERSONAL HAND WASHING TO MAINTAIN GOOD HYGIENE

I strongly disagree with your editing of the hand hygiene article and your assertion that the article on hand hygiene be redirected to hand washing. It should be the other way around. Hand washing should be rediredted to hand hygiene. Washing your hands is one way to obtain hand hygiene. Hand hygiene includes hand washing and the use of other procedures to obtain good hand hygiene. I am reinstating the orginal revised article and would appreciate it if you did no further editing to the article until it is discussed on the hand hygiene talk page.

Personal hand washing To maintain good hygiene, hands should always be washed after using the toilet, changing a diaper, tending to someone who is sick, or handling raw meat, fish, or poultry. Hands should also be washed before eating, handling or cooking food. Conventionally, the use of soap and warm running water and the washing of all surfaces thoroughly, including under fingernails is seen as necessary. One should rub wet, soapy hands together outside the stream of running water for at least 20 seconds, before rinsing thoroughly and then drying with a clean or disposable towel. After drying, a dry paper towel should be used to turn off the water (and open the exit door if one is in a restroom or other separate room). Moisturizing lotion is often recommended to keep the hands from drying out, should one’s hands require washing more than a few times per day.

Many people equate hygiene with ‘cleanliness,’ but hygiene is a broad term. It includes such personal habit choices as how frequently to take a shower or bathe, wash hands, trim fingernails, and change and wash clothes. It also includes attention to keeping surfaces in the home and workplace, including bathroom facilities, clean and pathogen-free.

Some regular hygiene practices may be considered good habits by a society, while the neglect of hygiene can be considered disgusting, disrespectful, or threatening.

EASY SURFACE CLEANING METHODS

Cleaning is the process of removing unwanted substances, such as dirt, infectious agents, and other impurities, from an object or environment. Cleaning occurs in many different contexts, and uses many different methods. Several occupations are devoted to cleaning.

CLEANING METHODS

Cleaning is broadly achieved through mechanical action and/or solvent action; many methods rely on both processes.

  • Washing, usually done with water and often some kind of soap or detergent
    • Pressure washing, using a high-pressure stream of water
  • Abrasive blasting, typically used to remove bulk material from a surface, may be used to remove contaminants as well
  • Acoustic cleaning, the use of sound waves to shake particulates loose from surfaces
    • Ultrasonic cleaning, using ultrasound, usually from 20–400 kHz
    • Megasonic cleaning, a gentler mechanism than ultrasonic cleaning, used in wafer, medical implant, and industrial part cleaning
  • Carbon dioxide cleaning, a family of methods for parts cleaning and sterilization using carbon dioxide in its various phases
  • Dry cleaning of clothing and textiles, using a chemical solvent other than water
  • Flame cleaning of structural steel with an oxyacetylene flame
  • Green cleaning, using environmentally friendly methods and products
  • Plasma cleaning, using energetic plasma or dielectric barrier discharge plasma created from various gases
  • Sputter cleaning, performed in a vacuum by using physical sputtering of the surface
  • Steam cleaning, in both domestic and industrial contexts
  • Thermal cleaning, in industrial settings, involving pyrolysis and oxidation
  • Wet cleaning, methods of professional laundering that avoid the use of chemical solvents

CLEANING TECHNIQUES AND EQUIPMENT

CLEANING TECHNIQUES AND EQUIPMENT 

Commercial office cleaning companies use a wide variety of cleaning methods, chemicals, and equipment to facilitate and expedite the cleaning process. The scope of work may include all internal, general and routine cleaning – including floors, tiles, partition walls, internal walls, suspended ceilings, lighting, furniture and cleaning, window cleaning, deep cleans of sanitary conveniences and washing facilities, kitchens and dining areas, consumables and feminine hygiene facilities as well as cleaning of telephones, IT, and other periodic cleaning as required. Carpet cleaning though, even with regular vacuuming, needs hot water extraction applied every 18 to 24 months. External cleaning, litter picking, and removal of graffiti may also be incorporated.[1]

The two global cleaning industry associations, the British Institute of Cleaning Science (BICSc) and the International Sanitary Supply Association (ISSA), both publish standards for managers and operatives engaged in cleaning activities.

The commercial cleaning industry is extremely competitive and employees tend to be at the lower end of the pay scale. However, unionized workers may earn higher wages. Many commercial cleaning companies provide on-the-job training for all new employees due to the nonexistence of tertiary based courses for the cleaning industry. A trend in the cleaning industry is the elimination of the usage of more hazardous chemicals such as drain cleaners due to liability and environmental concerns. Individuals employed in commercial cleaning typically hold the job title of janitor, custodian, or day porter.

CLEANLINESS AND HYGIENE

Hygiene is a set of practices performed to preserve health. According to the World Health Organization (WHO), “Hygiene refers to conditions and practices that help to maintain health and prevent the spread of diseases.”[2] Personal hygiene refers to maintaining the body’s cleanliness.

Many people equate hygiene with ‘cleanliness,’ but hygiene is a broad term. It includes such personal habit choices as how frequently to take a shower or bathe, wash hands, trim fingernails, and change and wash clothes. It also includes attention to keeping surfaces in the home and workplace, including bathroom facilities, clean and pathogen-free.

Some regular hygiene practices may be considered good habits by a society, while the neglect of hygiene can be considered disgusting, disrespectful, or threatening.Hygiene is a concept related to cleanliness, health and medicine. It is as well related to personal and professional care practices. In medicine and everyday life settings, hygiene practices are employed as preventative measures to reduce the incidence and spreading of disease.

Hygiene practices vary, and what is considered acceptable in one culture might not be acceptable in another.In the manufacturing of food, pharmaceutical, cosmetic and other products, good hygiene is a critical component of quality assurance.

The terms cleanliness and hygiene are often used interchangeably, which can cause confusion. In general, hygiene refers to practices that prevent spread of disease-causing organisms. Cleaning processes (e.g., handwashing) remove infectious microbes as well as dirt and soil, and are thus often the means to achieve hygiene.

Hand Care products

Order Now
X
Hygiene Plus